What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
This great article down below on the subject of How to Troubleshoot and Repair an Electric Water Heater is extremely attention-grabbing. Don't miss it.
Several contemporary houses make use of an electric water heater for their furnace, due to its ease and simplicity of use. Nonetheless, just like any other electrical devices, problems may develop with its use, unexpectedly. It can be really aggravating to awaken to a cold shower rather than a warm one or having your bathroom with water that isn't warm enough or even as well hot. Whatever the situation might be, hot water heater troubles can be quite nerve-racking. Thankfully, we've made a list of possible options to your water heater problems. There are a variety of aspects that can create most of these problems, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you turn off the primary power supply for security. Whatever the trouble is, getting it dealt with need to not pose too much of a problem if you comply with these steps:
Examine Your Power Supply:
As fundamental as this may seem, it is really required. Without adequate power, your hot water heater will not function. So the first thing to do when your water instantly stops working is to confirm that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the problem, simply turn it off and on once more. Change any type of damaged or worn-out fuse. Test the device with power after these changes to see if it's currently functioning.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power issue, then attempt taking a look at your burner if it is still functioning. Evaluate each of your burner to be sure the trouble isn't with any of them. If any one of them is defective, change that part and afterwards inspect whether the warm water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot sufficient, you may require to check the temperature level settings on your upper thermostat. Ensure the circuit breaker is turned off before doing anything. Open up the access panel and also press the red button for temperature level reset over the thermostat. This ought to help warm the water. Turn the circuit breaker back on and also inspect if the problem has actually been fixed.
Call A Professional:
If after changing all defective parts as well as resetting your temperature level, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for an expert point of view. The problem with your heating unit could be that the cold and hot taps have actually been switched over or it may be undersized for the quantity of warm water needed in your home. Whatever the instance might be, a professional plumber would certainly aid solve the issue.
Verdict
Water heater troubles are not constantly major. Much of them result from minor concerns like a blown fuse or worn-out heating element. Changing the faulty parts need to do the trick. Nevertheless, if you are still incapable to solve the issue, give a call to your nearest plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you liked our post about What Would Cause My Electric Water Heater to Stop Working?. Thank you so much for taking the time to read our post. Are you aware of another individual who is sincerely interested in the topic? Do not hesitate to promote it. Bless you for your time. Visit us again soon.
Booking
Report this page